Help! squid.conf setup

Hi,

I have one question about the squid.conf.
I want use one IP address (24.3.145.1) for squid program
to access Internet and this IP address will not be default gateway IP.
Would you tell me how to setup ?

I'm using Slackware Linux 2.0.0 and squid 1.1.14

207.207.202.0/24, 24.3.145.0/24 are real Internet IP address
129.129.202.0/24 is my Intranet IP addresses.
Interface ppp0 will handle another Intranet(129.101.101.0/24).
All the clients are on 207.207.202.0, 129.129.202.0, 129.101.101 sides.

Current routing table

Kernel routing table
Destination Gateway Genmask Flags MSS Window Use Iface
207.207.202.137 * 255.255.255.255 UH 1500 0 0 dummy1
207.207.202.136 * 255.255.255.255 UH 1500 0 0 dummy2
207.207.202.143 * 255.255.255.255 UH 1500 0 0 dummy4
207.207.202.141 * 255.255.255.255 UH 1500 0 1 ppp0
207.207.202.0 * 255.255.255.0 U 1500 0 30 eth0
129.129.202.0 * 255.255.255.0 U 1500 0 19 eth1
24.3.145.0 * 255.255.255.0 U 1500 0 37 eth2
127.0.0.0 * 255.0.0.0 U 3584 0 35 lo
default 24.3.145.1 * UG 576 0 513 eth2

New routing table

Kernel routing table
Destination Gateway Genmask Flags MSS Window Use Iface
207.207.202.137 * 255.255.255.255 UH 1500 0 0 dummy1
207.207.202.136 * 255.255.255.255 UH 1500 0 0 dummy2
207.207.202.143 * 255.255.255.255 UH 1500 0 0 dummy4
207.207.202.141 * 255.255.255.255 UH 1500 0 1 ppp0
207.207.202.0 * 255.255.255.0 U 1500 0 30 eth0
129.129.202.0 * 255.255.255.0 U 1500 0 19 eth1
24.3.145.0 * 255.255.255.0 U 1500 0 37 eth2
127.0.0.0 * 255.0.0.0 U 3584 0 35 lo
default 207.207.202.129 * UG 576 0 513 eth0

Many thanks

Jeff Liao

mailto: jeff@lys.com
Received on Tue Dec 02 1997 - 14:58:40 MST