Hi everyone.
My squid is now restart due to this error.
FATAL: xmalloc: debug out of array space!
Squid Cache (Version 2.4.STABLE1): Terminated abnormally.
CPU Usage: 484.600 seconds = 287.520 user + 197.080 sys
Maximum Resident Size: 0 KB
Page faults with physical i/o: 2312
total space in arena: 36004 KB
Total free: 30 KB 0%
As you already know, each time squid restarts, the physical i/o goes up and then stop. But as squid keeps on restarting, this value will rise even higher.
Thank you very much.
Best regards,
Edward Millington
(Network Administrator & Senior Technical Support Technician)
Cariaccess Communications Ltd.
Carlisle House
Hincks Street
Bridgetown
Barbados
1-246-430-7435
Fax : 1-246-431-0170
www.cariaccess.com
----- Original Message -----
From: "Joe Cooper" <joe@swelltech.com>
To: "Edward" <edward@cariaccess.com>
Sent: Friday, April 13, 2001 8:44 PM
Subject: Re: Web Admin
> When you set up Webmin, was Squid 2.4 the version you had installed? If
> so, then it will get confused and use the wrong syntax.
>
> Also beware that at the last minute, before going to 2.4 the syntax of
> the cache_dir line changed...so Webmin's Squid 2.4 support may be off a
> bit (I haven't gotten around to addressing those potential issues yet).
> Feel free to have at the Squid module in Webmin, if it is the fault of
> Webmin you certainly can patch it. It's just a bunch of perl code (very
> well written and comprehensible perl code, actually), so nothing
> stopping you from fiddling with it.
>
> Edward wrote:
>
> > Hi joe!
> >
> >
> >
> > Happy Easter
> >
> >
> >
> > Why does web admin does this?
> >
> > cache_dir asyncufs -1 /cache0 4000 9 256
> >
> > cache_dir asyncufs -1 /cache1 4000 9 256
> >
> > Squid 2.3 will not work with this.
> >
> >
> >
> > Can I patch this problem?
> >
> >
> > Thank you very much.
> >
> >
> >
> > Best regards,
> >
> > Edward Millington
> > (Network Administrator & Senior Technical Support Technician)
> > Cariaccess Communications Ltd.
> > Carlisle House
> > Hincks Street
> > Bridgetown
> > Barbados
> > 1-246-430-7435
> > Fax : 1-246-431-0170
> > www.cariaccess.com <http://www.cariaccess.com>
> >
> > ----- Original Message -----
> > From: "Joe Cooper" <joe@swelltech.com <mailto:joe@swelltech.com>>
> >
> > To: "Edward" <edward@cariaccess.com <mailto:edward@cariaccess.com>>;
> > "Squid Users" <squid-users@squid-cache.org
> > <mailto:squid-users@squid-cache.org>>
> >
> > Sent: Tuesday, April 10, 2001 5:22 AM
> >
> > Subject: Re: [squid-users] tuning squid 2.3/2.4 on a slow connection
> >
> >
> > > That's quite true. Many sites explicitly request not to be cached, or
> > > not to have some objects cached. CNN is probably one of those sites.
> > >
> > > This is a function of how cachable the origin website is. Squid can
> > > only know what the website tells it, regarding cachability. So even if
> > > a site does not change between visits, if the origin server says to
> > > Squid "do not cache this site" then Squid can only obey. Technically,
> > > you can force Squid to disrespect some things that will limit
> > > cachability using the refresh_pattern directive. However, this is only
> > > recommended when you /know/ what the origin server's content is like,
> > > and know how to tune to suit that content. Usually, Squid's defaults
> > > are a nice compromise between guaranteed freshness and 'perfect' caching
> > > of cachable data. You can't have both--so you have to balance it
> > carefully.
> > >
> > > If you are seeing an 800ms delay when an item is a cache hit (a real
> > > hit--and nothing on the page is a miss) then something is wrong in your
> > > OS/Squid/network configuration. Though we do not have enough
> > > information to even guess where it might be.
> > >
> > > Edward wrote:
> > >
> > > > When you request an object, it seems that it have to check the content
> > > > server first.
> > > >
> > > > eg, cnn and so on.
> > > >
> > > > There is also a fact where there is a smalll delay in sending cache
> > items to
> > > > you.It could be about up to 800ms.
> > > >
> > > > Thank you very much.
> > > >
> > > > Best regards,
> > > >
> > > > Edward Millington
> > > > (Network Administrator & Senior Technical Support Technician)
> > > > Cariaccess Communications Ltd.
> > > > Carlisle House
> > > > Hincks Street
> > > > Bridgetown
> > > > Barbados
> > > > 1-246-430-7435
> > > > Fax : 1-246-431-0170
> > > > www.cariaccess.com <http://www.cariaccess.com>
> > > > ----- Original Message -----
> > > > From: "Joe Cooper" <joe@swelltech.com <mailto:joe@swelltech.com>>
> > > > To: "Edward" <edward@cariaccess.com <mailto:edward@cariaccess.com>>
> > > > Cc: "squid" <squid-users@squid-cache.org
> > <mailto:squid-users@squid-cache.org>>
> > > > Sent: Monday, April 09, 2001 5:59 AM
> > > > Subject: Re: [squid-users] tuning squid 2.3/2.4 on a slow connection
> > > >
> > > >
> > > >
> > > >> What latency problem? If the object is a hit it should come back
> > > >> immediately, if it is a miss, there is nothing Squid can do to make it
> > > >> come through the line faster.
> > > >>
> > > >> Squid opens whatever connections the client browser opens. So when IE
> > > >> opens 8 connections at a time, Squid will too.
> > > >>
> > > >> Edward wrote:
> > > >>
> > > >>
> > > >>> Hi JOe!
> > > >>>
> > > >>> What about the latency problem on slow connections?
> > > >>>
> > > >>> Can I raise the number of connection squid opens to the content
> > server
> > > >>
> > > > like
> > > >
> > > >>> what IE can do? IE. Pipelining?
> > > >>>
> > > >>> Thank you very much.
> > > >>
> > > >> --
> > > >> Joe Cooper <joe@swelltech.com
> > <mailto:joe@swelltech.com>>
> > > >> Affordable Web Caching Proxy Appliances
> > > >> http://www.swelltech.com
> > > >>
> > > >>
> > >
> > >
> > > --
> > >
> > > --
> > > Joe Cooper <joe@swelltech.com
> > <mailto:joe@swelltech.com>>
> > > Affordable Web Caching Proxy Appliances
> > > http://www.swelltech.com
> > >
> > >
>
>
> --
>
> --
> Joe Cooper <joe@swelltech.com>
> Affordable Web Caching Proxy Appliances
> http://www.swelltech.com
>
>
Received on Sat Apr 14 2001 - 05:17:14 MDT
This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 16:59:19 MST