Re: [squid-users] second squid proxy

Armend ALIAGA wrote:
> Hi,
> yes the network set is like this :
> clients ---> 2ndsquidproxy ---> 1stsquidproxy(its ip is 10.10.10.1)
>> --> PIX firewall ( this IP 10.10.10.1 is NATed )
> The squid.conf is like this :cache_peer 10.10.10.1 parent 3128 0 no-query default
> acl LAN src 10.10.10.1/24
> http_access allow LAN
> never_direct allow all
> Starting WWW-proxy squid startproc: exit status of parent of /usr/sbin/squid: 1
> failed
>

Start squid manually straight on the binary. There are required config
options missing. cache_dir at least. Some others which the binary will
mention in its abort messages to the screen.

Amos

>
> ----- Original Message ----
>> From: Indunil Jayasooriya <indunil75_at_gmail.com>
>> To: Armend ALIAGA <aliaga038_at_yahoo.com>
>> Cc: squid-users <squid-users_at_squid-cache.org>
>> Sent: Thursday, June 5, 2008 9:27:49 AM
>> Subject: Re: [squid-users] second squid proxy
>>
>>>> On Tue, Jun 3, 2008 at 7:25 PM, Armend ALIAGA wrote:
>>>>> Hi all,
>>>>> I would be gratefull if somebody could help me out on this issue,
>>>>> I have a squid proxy (.i.e. IP.10.10.10.1) running wonderfull up to now..
>>>>> I set up another squid proxy ... and the issue is that I dont know how to
>>>> redirect all http requets from this one to the first proxy 10.10.10.1 without
>>>> going directly to internet ? ( I'am not allowed to NAT 2 IP in the pix ?!?)
>>>>> I tried to do it with "cache peer parent 10.10.10.1 3128 3130" but I have
>> an
>>>> error when aplying policy.
>>>>> thanks,
>>>> pls try belpw.
>>>>
>>>> cache_peer 10.10.10.1 parent 3128 0 no-query default
>>>> acl all src 0.0.0.0/0.0.0.0
>>>> never_direct allow all
>>>>
>> May I get your network set up with ips, if possible?
>>
>> I think it is like this.
>>
>> clients ---> 2ndsquidproxy ---> 1stsquidproxy(its ip is 10.10.10.1)
>> --> Your firewall
>>
>> Hope to hear from you.
>>
>>
>>
>> --
>> Thank you
>> Indunil Jayasooriya
>
> THIS IS THE ERROR WHEN TRYING TO START SQUID AFTER THE CHANGES :

-- 
Please use Squid 2.7.STABLE1 or 3.0.STABLE6