[squid-users] Re: WCCP configuration

Hi,

Thanks for the reply. It did help us solve the problem.

But there is a new issue.

We have configured as squid+tproxy. The squid ip is not displayed and
only the client ip is displayed when we do the proxy test. But after
configuring wccp we find that the server ip is displayed in the proxy
test instead of the client ip.

We also find that the http request is pathetically slow.

squid.conf

wccp2_service_info 80 protocol=tcp flags=src_ip_hash priority=240
ports=80
wccp2_service dynamic 90
wccp2_service_info 90 protocol=tcp flags=dst_ip_hash,ports_source
priority=240 ports=80

http_port 3128 transparent tproxy

iptable:
/usr/local/sbin/iptables -t tproxy -A PREROUTING -i wccp -p tcp -m tcp
--dport 80 -j TPROXY --on-port 3128

We created a gre tunnel based on the router identifier.

wccp2_router xx.xx.xxx.xx (ip of router interface connected to squid
machine)

The following command is assigned at the router interface connected to
the lan.
ip wccp 80 redirect in
ip wccp 90 redirect out

Following command at the router interface connected to squid.
ip wccp redirect exclude in

Router : Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M),
Version 12.4(13b)
Kernel : linux-2.6.20.21
IPtable : iptables-1.3.8
Os Ver : squid-2.7 Stable 5

#lsmod

ip_gre 19616 0
iptable_filter 11136 0
ipt_TPROXY 11136 1
ipt_REDIRECT 10624 0
xt_tcpudp 11904 1
reiserfs 235144 5
iptable_tproxy 23036 2 ipt_TPROXY
iptable_nat 15492 1 iptable_tproxy
ip_nat 24620 3 ipt_REDIRECT,iptable_tproxy,iptable_nat
ip_tables 25448 3
iptable_filter,iptable_tproxy,iptable_nat
x_tables 23560 5
ipt_TPROXY,ipt_REDIRECT,xt_tcpudp,iptable_nat,ip_tables
ip_conntrack 53400 3 iptable_tproxy,iptable_nat,ip_nat

The internet works, but the browsing is dead slow. Temporarily we have
bypassed squid to browse the net.

Thanks
VK

-----Original Message-----
From: Henrik Nordstrom <henrik_at_henriknordstrom.net>
To: viveksnv_at_aol.in
Cc: squid3_at_treenet.co.nz; squid-users_at_squid-cache.org
Sent: Thu, 8 Jan 2009 12:05 am
Subject: Re: WCCP configuration

ons 2009-01-07 klockan 08:46 -0500 skrev viveksnv_at_aol.in:

> wccp2_router xxx.xx.xxx.xxx
> wccp_version 4
> wccp2_forwarding_method 1
> wccp2_return_method 1
> wccp2_assignment_method 1
> wccp2_service dynamic 80
> wccp2_service_info 80 protocol=tcp flags=src_ip_hash priority=240
> ports=80
> wccp2_service dynamic 90
> wccp2_service_info 90 protocol=tcp flags=dst_ip_hash,ports_source
> priority=240 ports=80
>
>
> Router Eth0 - connected to lan. Eth1 - connecte to squid.

Have you also configured
* A loopback address on the router, giving it a easily identified router
ID

* the required GRE/WCCP tunnel interface on the Squid server

* disabled rp_filter on the above GRE/WCCP interface.

* And adjusted the REDIRECT/NAT rules to act on traffic received on the
GRE/WCCP interface configured above?

> Service Identifier: web-cache
> Number of Service Group Clients: 1
> Number of Service Group Routers: 1
> Total Packets s/w Redirected: 11336
> Process: 0
> Fast: 0
> CEF: 11336

Looks fine.

> Is there any simple way of configuring WCCP. We have beating round
the
> bush all day long to configure wccp.

WCCP as such is configured. But something is missing in the interception
at the proxy. Most likely the GRE interface mentioned above.

Regards
Henrik

________________________________________________________________________
You are invited to Get a Free AOL Email ID. - http://webmail.aol.in
Received on Fri Jan 09 2009 - 14:41:52 MST