[squid-users] Problem in WCCP configuration

Hi All,

Two wccp services 80, 90 is detected by the router. 80 - outgoing,
90-incoming. But return traffic does not comes to squid. No packets
redirected by the service 90.

Router IOS version is
Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version
12.4(13b), RELEASE SOFTWARE (fc3). Any bug in this IOS version.

Global WCCP information:
    Router information:
        Router Identifier: xx.xx.xx.xx
        Protocol Version: 2.0

    Service Identifier: 80
        Number of Service Group Clients: 1
        Number of Service Group Routers: 1
        Total Packets s/w Redirected: 1146
          Process: 0
          Fast: 0
          CEF: 1146
        Redirect access-list: 15
        Total Packets Denied Redirect: 2814525
        Total Packets Unassigned: 15328
        Group access-list: -none-
        Total Messages Denied to Group: 0
        Total Authentication failures: 0
        Total Bypassed Packets Received: 0

    Service Identifier: 90
        Number of Service Group Clients: 1
        Number of Service Group Routers: 1
        Total Packets s/w Redirected: 0
          Process: 0
          Fast: 0
          CEF: 0
        Redirect access-list: 15
        Total Packets Denied Redirect: 3143419
        Total Packets Unassigned: 17297
        Group access-list: -none-
        Total Messages Denied to Group: 0
        Total Authentication failures: 0
        Total Bypassed Packets Received: 0

Squid configuration :

wccp2_service dynamic 80
wccp2_service_info 80 protocol=tcp flags=src_ip_hash priority=240
ports=80
wccp2_service dynamic 90
wccp2_service_info 90 protocol=tcp flags=dst_ip_hash,ports_source
priority=240 ports=80

But it works good in transparent mode.

Thanks in advance.

Thanks
Vk.

________________________________________________________________________
You are invited to Get a Free AOL Email ID. - http://webmail.aol.in
Received on Fri Jan 16 2009 - 09:03:00 MST