[squid-users] Building squid 3.1.0.13 on MS-Windows (minGW)

Hello all,

We are currently looking at evaluating squid to use in an upcoming project.
One of the requirements is to use SSL inspection using sslBump.

To this end I have downloaded and attempted to built from source, the build
completes successfully however squid dies with the following error:

 2009/08/14 22:45:11| aclIpParseIpData: unknown first address in
'127.0.0.1/32'
FATAL: Bungled squid.conf line 2: acl localhost src 127.0.0.1/32
Squid Cache (Version 3.1.0.13): Terminated abnormally.
CPU Usage: 0.000 seconds = 0.000 user + 0.000 sys
Maximum Resident Size: 5636 KB
Page faults with physical i/o: 1459

This is using the default squid.conf

acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8
acl localnet src 10.0.0.0/8              # RFC1918 possible internal network
acl localnet src 172.16.0.0/12       # RFC1918 possible internal network
acl localnet src 192.168.0.0/16     # RFC1918 possible internal network
acl SSL_ports port 443
acl Safe_ports port 80                    # http
acl Safe_ports port 21                    # ftp
acl Safe_ports port 443                  # https
acl Safe_ports port 70                    # gopher
acl Safe_ports port 210                  # wais
acl Safe_ports port 1025-65535  # unregistered ports
acl Safe_ports port 280                  # http-mgmt
acl Safe_ports port 488                  # gss-http
acl Safe_ports port 591                  # filemaker
acl Safe_ports port 777                  # multiling http
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access allow localnet
http_access allow localhost
http_access deny all
http_port 3128
hierarchy_stoplist cgi-bin ?
coredump_dir c:/squid/var/cache
refresh_pattern ^ftp:                    1440       20%        10080
refresh_pattern ^gopher:           1440       0%          1440
refresh_pattern -i (/cgi-bin/|\?) 0            0%          0
refresh_pattern .                             0              20%        4320

If I remove all acl’s that refer to IP Addresses then squid will start
however squid –z does not build cache structure and starting squid results
in the following error in the cache.log

2009/08/14 22:59:40| Adding DHCP nameserver 192.168.240.1 from Registry
2009/08/14 22:59:40| WARNING: rejecting '192.168.240.1' as a name server,
because it is not a numeric IP address

Build environment is

Windows XP
MinGW 5.14
MSysy 1.011
MSysDTK 1.0.1
OpenSSL 0.9.8k
Libcrypt 1.1
Db 1.85

Built using
$ ./configure --prefix=c:/squid --disable-wccp --disable-wccpv2
--enable-win32-service --enable-default-hostsfile=none --enable-ssl
Make
Make install

The binary package (3.0) installed and ran successfully but as ssl was not
enabled was not able to fully evaluate.

Can anyone offer any assistance ?
Received on Fri Aug 14 2009 - 21:46:03 MDT