[squid-users] squid + wccp2

Hi All,

We have requirement to configure squid to deploy with cisco wccp2.

I have some confusion regarding configuration, kindly clear my queries
and guide me to configure it.

My current network senario:

Wan side cisco 7200 router ( wan ip 84.24.xx.xx ) ( lan ip
149.255.xx.xx) ( lan ip is bgp routed ip pool )
                      |
                      |
                      switch ---------------------squid box ( one
interface only ip : 149.255.xx.19) ( gateway ip is router lan ip )
                        |
                        |
                    End Users

Now i need to configure squid to use with wccp.

i tried to find reference document from google and squid wiki. But i
have some queries,

what is remote ip while configuring ip tunnel in squid and local ip ?

as per my current configuration i tried : remote ip is router wan ip (
84.24.xx.xx) and local ip is squd ip ( 149.255.xx.xx )

is it correct one ?

and what is the wccp2_router router ip in squid.conf

i used 149.255.xx.xx ( router lan ip )

is it correct one ?

---------------------------------------------------------------------------------
test 1

actually i tried to configure router loop back ip on tunnel remote and
squid ip as local ip on tunnel but that time i can see traffic on wccp
interface and traffic on iptables nat redirection rule but no traffic
in squid access.log and surfing is not working.

------------------------------------------------------------------------------------------------

So please guide me , what could be right configuration while going to
use squid with wccp2.

OS: fedora 15
squid : 3.1.14

Regards,
Benjo
Received on Tue Oct 11 2011 - 13:52:50 MDT