[squid-users] Unbalaned Cpu cores with squid 3.4.3 with centos 6.4 64 bit

hi all ,

ive tried cenots6.4 64 bit with32 G ram with squid 3.4.3 with tptoxy ,

but

the cpu cores are not balanced !!!
this machine is delr720 it has 24 cores ,

before i go to try on this machine, i tried it on quad core machine with
same config squid file and it gave me equal sharing among 8 cores of cpu .

but when i tried the same config and same kernel and same squid and same os
on delr720 which has 24 cores cpu ,
i found that process of squid are only distributed on about 5 cores from
total of 25 core !!!!!

my question is ,
does squid depend on hardware core cpu ? does that mean squid SMP
compatibale with some hardware and not with others ???

======================================
ive pumped about 1000 ips to squid
and here is a snapshot with cores which are un balanced !
those are cores of delr720
<http://squid-web-proxy-cache.1019090.n4.nabble.com/file/n4664748/829718907.png>

i have only 4 workers and dont wanto to increase them , because i think if i
increased them i will have low bw utilization .

===================================================
here is last of dmesg file log :

> EXT4-fs (sda1): re-mounted. Opts: (null)
> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0860)
> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
> iTCO_vendor_support: vendor-support=0
> dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
> perf_event_intel: PEBS enabled due to microcode update
> microcode: CPU23 updated to revision 0x710, date = 2013-06-17
> microcode: CPU22 updated to revision 0x710, date = 2013-06-17
> microcode: CPU21 updated to revision 0x710, date = 2013-06-17
> microcode: CPU20 updated to revision 0x710, date = 2013-06-17
> microcode: CPU19 updated to revision 0x710, date = 2013-06-17
> microcode: CPU18 updated to revision 0x710, date = 2013-06-17
> microcode: CPU17 updated to revision 0x710, date = 2013-06-17
> microcode: CPU16 updated to revision 0x710, date = 2013-06-17
> microcode: CPU15 updated to revision 0x710, date = 2013-06-17
> microcode: CPU14 updated to revision 0x710, date = 2013-06-17
> microcode: CPU13 updated to revision 0x710, date = 2013-06-17
> microcode: CPU12 updated to revision 0x710, date = 2013-06-17
> microcode: CPU11 updated to revision 0x710, date = 2013-06-17
> microcode: CPU10 updated to revision 0x710, date = 2013-06-17
> microcode: CPU9 updated to revision 0x710, date = 2013-06-17
> microcode: CPU8 updated to revision 0x710, date = 2013-06-17
> microcode: CPU7 updated to revision 0x710, date = 2013-06-17
> microcode: CPU6 updated to revision 0x710, date = 2013-06-17
> microcode: CPU5 updated to revision 0x710, date = 2013-06-17
> microcode: CPU4 updated to revision 0x710, date = 2013-06-17
> microcode: CPU3 updated to revision 0x710, date = 2013-06-17
> microcode: CPU2 updated to revision 0x710, date = 2013-06-17
> microcode: CPU1 updated to revision 0x710, date = 2013-06-17
> microcode: CPU0 updated to revision 0x710, date = 2013-06-17
> microcode: Microcode Update Driver: v2.00
> &lt;
> tigran_at_aivazian.fsnet.co.uk
> &gt;
> , Peter Oruba
> microcode: CPU23 sig=0x206d7, pf=0x1, revision=0x70b
> microcode: CPU22 sig=0x206d7, pf=0x1, revision=0x70b
> microcode: CPU21 sig=0x206d7, pf=0x1, revision=0x70b
> microcode: CPU20 sig=0x206d7, pf=0x1, revision=0x70b
> microcode: CPU19 sig=0x206d7, pf=0x1, revision=0x70b
> microcode: CPU18 sig=0x206d7, pf=0x1, revision=0x70b
> microcode: CPU17 sig=0x206d7, pf=0x1, revision=0x70b
> microcode: CPU16 sig=0x206d7, pf=0x1, revision=0x70b
> microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x70b
> microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x70b
> microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x70b
> microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x70b
> microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x70b

========================================
[root_at_squid ~]# cat /etc/redhat-release
CentOS release 6.5 (Final)
[root_at_squid ~]# uname -a
Linux squid.ps 3.7.5 #1 SMP Tue Feb 11 21:31:21 EET 2014 x86_64 x86_64
x86_64 GNU/Linux
[root_at_squid ~]#
==================================================================
[root_at_squid ~]# cat /etc/squid/squid.conf

> #################################################################
> # Example rule allowing access from your local networks.
> # Adapt to list your (internal) IP networks from where browsing
> # should be allowed
> acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
> acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
> acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
> acl localnet src fc00::/7 # RFC 4193 local private network range
> acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged)
> machines
> acl mysubnet src xxxxxxxxxxxxxxxxxxxxxxxxxxxx
> acl eliezer src xxxxxxxxxxxxxxxxxxxx
> acl localip src xxxxxxxxx
> acl SSL_ports port 443
> acl Safe_ports port 80 # http
> acl Safe_ports port 21 # ftp
> acl Safe_ports port 443 # https
> acl Safe_ports port 70 # gopher
> acl Safe_ports port 210 # wais
> acl Safe_ports port 1025-65535 # unregistered ports
> acl Safe_ports port 280 # http-mgmt
> acl Safe_ports port 488 # gss-http
> acl Safe_ports port 591 # filemaker
> acl Safe_ports port 777 # multiling http
> acl CONNECT method CONNECT
> ######################################################
> # Recommended minimum Access Permission configuration:
> # Deny requests to certain unsafe ports
> ##########################################################
> ##############################################################
> http_access deny !Safe_ports
> http_access allow localnet
> # Deny CONNECT to other than secure SSL ports
> http_access deny CONNECT !SSL_ports
> #######################################################
> ###########SMP oPTIONS#####################
> dns_v4_first on
> workers 4
> ########################################################
> #cpu_affinity_map process_numbers=1,2,3,4 cores=2,4,6,8
> #http_port 127.0.0.1:400${process_number}
> #http_port ::1:66000
> #########################################
> visible_hostname xxxxxxxxxxxxxxxx
> ####################################################
> ####Filterring##############
> acl blockkeywords dstdomain "/etc/squid/xxxxxxxxxxx"
> http_access deny blockkeywords
> #################################################
> cache_log /var/log/squid/cache.log
> access_log /var/log/squid/access.log
> ###############################################
> http_port ffffff:xxxx
> http_port dddddd:eeeeeeeeeee tproxy
> ############################################################################
> http_access allow mysubnet
> ############################################################################################
> cache_mgr xxxxxxxxxxxxxxxxxxxxx
> cachemgr_passwd xxxxxxxxxxxxxxxxxxxx all
> #######################################################
> # add user authentication and similar options here
> http_access allow manager localhost
> http_access allow manager localip
> http_access allow manager mysubnet
> http_access allow mysubnet manager
> http_access deny manager
> #######################################################################
> cache_mem 3000 MB
> maximum_object_size_in_memory 10 MB
> #########################################################
> quick_abort_pct 95
> fqdncache_size 65535
> ipcache_size 65535
> ###########################################################
> ipcache_low 98
> ipcache_high 99
> #####################################################
> ########### WCCP2 Config#############
> wccp2_router x.x.x.x
> wccp_version 1
> wccp2_forwarding_method 2
> wccp2_return_method 2
> wccp2_assignment_method 2
> wccp2_service dynamic 60
> wccp2_service_info 60 protocol=tcp flags=src_ip_hash priority=250 ports=80
> wccp2_service dynamic 70
> wccp2_service_info 70 protocol=tcp flags=dst_ip_hash,ports_source
> priority=250 ports=80
> ######################################################
> cache_effective_user squid
> cache_effective_group squid
> #######################################################
> memory_replacement_policy heap GDSF
> cache_replacement_policy heap LFUDA
> #####################################################
> dns_nameservers x.x.x.x 8.8.8.8
> #######################################################
> http_access deny all
> ##############################
> refresh_pattern ^ftp: 1440 20% 10080
> refresh_pattern ^gopher: 1440 0% 1440
> refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
> refresh_pattern . 0 20% 4320
> ####################################################
> memory_pools off
> pconn_timeout 2 minutes
> persistent_request_timeout 1 minute
> #####################
> max_filedesc 131072

*any help ????
any suggestion ????*

-----
Dr.x

--
View this message in context: http://squid-web-proxy-cache.1019090.n4.nabble.com/Unbalaned-Cpu-cores-with-squid-3-4-3-with-centos-6-4-64-bit-tp4664748.html
Sent from the Squid - Users mailing list archive at Nabble.com.